FRP grid can delay the aging time by making 0.5mm thick resin rich layer and ultraviolet absorbent (processed in the factory) on its surface. As the running time goes on, the rich resin layer and ultraviolet absorber will be damaged, which will affect their service life. When the manufacturer of FRP grid uses fixed steel nail or stainless steel clasp method to lay the FRP grid, first fix one end of the fixed clasp and steel nail on the lower structure that has been sprayed with tack coat asphalt, and the steel nail can be hammered or shot.
It is often used in chicken house, pigeon house, pig house and other farms. Reliability: it has the characteristics of flame-retardant and edge, and will not cause electric spark due to collision during the equipment and application of polyester grid plate. It is suitable for use in flammable and explosive environment. In addition, the grid with antiskid surface layer can prevent slipping and reduce accidents. Strong bearing capacity and long service life.
Both ends of the paper cylinder of each roll of glass fiber grating are marked with orange and blue marks. Before laying, the glue surface shall be selected downward, and the color of the above marks shall be determined at one end, so as to facilitate construction and avoid wrong laying of the glue surface. When laying the GRP grid, it shall be kept flat and taut, and both sides shall be aligned. It can be leveled with a level ruler to make the GRP grid have effective tension. After laying, it shall be rolled once with a clean steel roller.
There are many inconveniences in different places of waste liquid and waste residue of FRP grid manufacturers in the farm, which is easy to form the damage on the anti-corrosion ground. The concept of double-layer steel grid plate on the solid ground is different, that is, because the upper layer is composed of FRP grid plate, the base layer is on the ground of building base, the operator walks on the surface layer of steel grid plate, and the sewage from the farm is discharged by FRP grid manufacturers The products are placed on the surface layer of GRP grid plate, and the waste slag and waste liquid can be discharged to the base substrate ground. After the operation, it can be washed by a powerful water jet to remove the debris on the ground, which not only facilitates the operation of workers, but also facilitates the inspection of management personnel.
Scan QR code to learn more!