Product properties:

This product has good water dilution, low odor, does not contain toluene and xylene, and meets the requirements of environmental regulations. Good stability, high-speed dispersion, acid and alkali resistance, heat storage, centrifugation, and dilution stability. Excellent film-forming property, rapid surface drying at room temperature, good wettability and leveling. Used in combination with suitable heat-stable pigments, fillers or metal powders, it is the most suitable base material for preparing 200-1000℃ high-temperature resistant water-based coatings. After full curing, the coating film has good thermal stability, excellent weather resistance and salt spray resistance. After full curing, the paint film has good hardness, toughness, wear resistance, impact resistance and chemical resistance.

Technical indicators：

Appearance: milky white liquid with blue light (visual inspection)

Emulsifier ion property: non-ionic

pH value (20℃): 8-9

Solid content (wt%): 45-50

Dynamic viscosity（Cp）: 20-100

Density（Kg/L）: 1.02-1.11

Curing conditions: 200-280℃ 10-60min, the higher the temperature, the shorter the curing time. The best curing is 220℃ 30min or 280℃ 10min, the paint film has the best salt spray and chemical resistance under this curing condition.

Applications:

Glass fiber mica tape, mica soft board, glass fiber sleeve, etc. Household appliances, cookers, stoves, fireplaces, ovens, kilns, flues, chimneys, automobile tail pipes and engine high temperature resistant water-based coatings.

Weather-resistant and anti-corrosion outdoor metal water-based coatings.

Household appliances (such as non-stick pan coatings), water-based insulating coatings for electronic and electrical components and electromechanical products.

The most suitable base material for preparing high temperature resistant water-based thermal insulation coatings, fire retardant coatings, heavy anti-corrosion coatings, thermal conductive coatings, insulating coatings, etc.

Packaging and storage and transportation:

Packing specifications: 50 kg plastic barrel.

This product should be stored in a ventilated and cool place above 0℃, not exceeding 40℃, and transported as non-dangerous goods.

Shelf life:

Store in a sealed container for 12 months.