Waterborne interior wall coatings are made up of water, emulsion, pigments and fillers and auxiliaries. The difference between interior wall coatings and exterior wall coatings is that they are different in environmental resistance.
Generally speaking, outdoor coatings need to have certain resistance to wind, frost, snow, sunshine, etc. (water resistance, alkali resistance, UV resistance, frost resistance, fade resistance, pollution resistance, etc.), so the requirements of raw materials selected in the formula are higher than that of interior wall coatings. The environment experienced by the general interior wall coating is more moderate than that of the external wall, so the general interior wall coating cannot be used for the external wall.
1. Whether exterior wall coating can be used for interior wall
Chenguang exterior wall coating (tianjunfeng project) project
The performance requirement of exterior wall coating is higher than that of interior wall, so exterior wall coating can be used for interior wall. Because the price of the exterior wall coating is higher than that of the interior wall coating, it is not used by the general consumers. However, when the requirements for the interior wall coating are more severe or there are special requirements, the exterior wall coating can be used, such as bathroom, toilet, kitchen and interior, to make it more magnificent.
2. Why are there requirements for wall humidity and wall maintenance period before painting
The wall is wet. On the one hand, the water in the cement or sand slurry just finished construction has not completely disappeared. On the other hand, the environment is too wet or the rain causes excessive humidity. Too wet wall will affect the adhesion of the paint surface, will cause the paint surface blistering, cracking, fading and promote the growth of mold.
Can the water-based interior wall coating with high viscosity be directly sprayed?
The water-based interior wall coating with high viscosity can be directly sprayed with airless paint without dilution or a small amount of dilution, and the effect is good.
If air spraying is used, the water-based interior wall coating must be diluted to the corresponding viscosity, because the viscosity of the required water-based interior wall coating is different with different spray guns and different air pressure. The water-based interior wall coating requires a large amount of spray paint and a large spray range.
Taking Chenguang water-based ceramic tile adhesive as an example, it is a kind of water-soluble high-quality environmental protection product with excellent performance. It has low odor, better environmental protection type, can be used immediately without dilution.
How to choose painting tools?
What should be paid attention to when using new typewriters and new bristles?
According to the size, properties and paint materials of the brush surface, choose different hard brush and brush arrangement. Flat hard brush shall be selected for primer and ready mixed paint; flat brush with thinner and better elasticity shall be selected for varnish; bristle brush with larger elasticity and strength than typesetting brush is suitable for painting with higher viscosity.
When using a new bristle brush, before painting, the bristle brush should be placed on No. 1 sandpaper, and the head of the bristle should be sanded back and forth to make the bristle smooth and smooth, and then dip a small amount of paint on the old surface, and brush back and forth several times to make the floating bristle fall off, so as to ensure that the bristle will not fall off easily during brushing.
When using the new brush, in order to reduce hair loss, you should first use your fingers to move the brush hair back and forth, so that the unstuck wool will fall out, and then soak it with hot water, flatten the pen head, wrap it with paper, and let it dry by itself.
Why is it better to brush the water-based interior wall paint twice or more?
Two coats of water-based interior wall coating are mainly applied to achieve its proper covering power and coating surface performance. Because the covering power and surface performance of the coating have a certain relationship with the thickness of the coating surface, in order to achieve the best decoration and protection effect, the waterborne interior wall coating is best brushed twice.
6. How long can the water-based interior wall paint be reapplied for the second time after it is applied once?
The interval between two coats of waterborne interior wall coating shall be determined according to the specific construction conditions. It's mainly the first time after it's all dry and then the second time. Some coating surface dry slower will extend the recoat time.
How long can paint be applied after the putty is applied?
a. How to deal with gypsum board, asbestos cement board and other base materials?
Gypsum board and asbestos cement board shall be fully dry before painting. Due to their certain alkalinity, it is recommended to apply the first coat of sealing primer and then the top coat.
b. When the old wall is painted with water-based interior wall coating, does not brushing primer have any effect? How to deal with the wall?
If the old wall is solid and the wall alkali is not serious, you can brush the top coat directly after cleaning the wall. If the coating surface is loose and uneven after shoveling, it is necessary to reapply putty and use primer to ensure the quality of finish.
Light up to see, you'd better see!
-THE END-
Past highlights
After the novel coronavirus pneumonia, Chenguang Fu's antibacterial and antibacterial functional coatings will develop a good opportunity.
At 315, Miao Guoyuan, chairman of Chenguang Group, accepted an exclusive interview with Huicong paint.com
Return to work and "service" will not be slack, overcome difficulties and ensure production. Chenguang Group reappears CCTV
Weigh! The inauguration ceremony of "4.0 intelligent project" of Chenguang Group was held
Heart Wuhan pneumonia epidemic, Jiangsu Chenguang Group in action!
Sum up 2019, look forward to 2020, Chenguang Group's year-end summary meeting was successfully held