Champion Group - product knowledge
Whale sea high flash point industrial grey alkyd antirust coating whale sea high flash point industrial grey alkyd antirust coating is an environment-friendly and safe coating with high solid content, low VOC content and high flash point, which is carefully developed by the technology center of the group and conforms to the national environmental protection standard in response to the policy of the Ministry of environmental protection of the people's Republic of China.
This product adopts the high-tech and high flash point formula developed exclusively by champion group. It has passed the cargo transportation appraisal and dangerous chemical appraisal, reducing the requirements and costs for transportation and storage. At the same time, the product adopts high solid and low viscosity technology, with solid content of more than 70%, reducing VOC content in the paint, VOC content ≤ 420g / L, meeting the national Ministry of environmental protection and provincial VOC limit standards, please rest assured use of the steel structure factory.
Products with a certain gloss, mainly used for general steel structure surface priming rust. It has the characteristics of high solid content, good antirust performance, good weather resistance, fast drying, high covering power, high hardness, stable quality, etc. it is suitable for antirust, decoration and protection of steel structures, mechanical equipment, pipes and other steel surfaces.
Composition: it is composed of alkyd resin, coloring pigment, antirust pigment, filler, auxiliary agent, high flash point environmental protection solvent, etc.
Features: fast drying, with a certain gloss, good rust resistance, convenient construction, outdoor rainy days without rust. At the same time, the flash point is high, and the flash point is & gt; 60 ℃ (closed), which is a non hazardous chemical, so the transportation and storage are more convenient.
Application: it is suitable for general steel structure and other steel surfaces to be antirust.
Color: Industrial grey
Gloss: Shimmer
Theoretical dosage: 5.5 ㎡ / kg (calculated by 50 μ m dry film, excluding loss)
Specific gravity: about 1.5
Drying time: 25 ℃ surface drying ≤ 2h, solid drying ≤ 24h
Flash point: 65 ℃
Storage period: 12 months
Coating method: spray, brush and roll coating (bubble will be produced).
Surface treatment: the steel shall be shot blasted or sandblasted to reach Swedish derusting SA2, or polished to Swedish derusting standard ST3 by hand and electric tools. The steel coated with shop primer shall be subject to secondary derusting, meeting the Swedish derusting standard ST3.
Matching coating: directly applied.
matters needing attention:
The paint contains pigments and fillers with large proportion, which are easy to precipitate. The paint should be thoroughly mixed before construction. The diluent shall be added in an appropriate amount, generally no more than 20%, which can be sprayed normally, and the paint film composition shall not be damaged to cause sagging. In summer, the pressure and distance of the spray gun should be adjusted to prevent "dry spraying". The temperature of construction base material shall be higher than the dew point by more than 3 ℃, and the relative humidity shall be ≤ 85%.
Note: the data, use and suggestions of the above products are given based on the experience in the test and actual use, and are only for construction reference. For the construction we do not know, our company only guarantees the quality of paint products. In case of any change to the above data, the latest instructions of the company shall prevail without further notice.