The resin tile cracked after one year's use. Why? What is the cause? Is the life span of resin tile only a short year? Let's explore it together!
The so-called one-year cracked tile can't be called resin tile at all. In fact, it's a real "plastic tile". In short, the materials used by manufacturers are very poor (the proportion of recycled materials in the skeleton layer is greater than that of new materials)
Now we are carrying out "flat to slope" and building new houses in most rural areas, so resin tile has also entered our vision as a new type of roofing material, which is called "building a big tree to attract wind". At the same time, it has also led to many manufacturers with no production experience to make random investment, just to get out the "resin tile" with similar shape with resin tile, and randomly change the formula, but it is not With the performance of resin tile, it also reduces its own production cost, which leads to the unqualified quality of resin tile produced. There is no way to meet people's daily use of manufacturers. In order to maximize their own interests, they often cut corners and materials. Buyers demand low prices, but also pursue quality, which will certainly reduce the profit point of resin tile manufacturers, and thus touch the buyer's Combined with the interests of the installation master's installation is not rigorous, the screw is too tight, and it is not impossible to tear the right back tile.
There are also some reasons as follows: 1. The high water absorption of the material leads to the crack of the joint; 2. The hardness of the material is high, and the impact strength is poor; 3. The wet expansion rate of the material is high, and the moisture absorption and expansion of the plate will occur when the material is wet; 4. The brittleness of the material is large, the tensile and bending strength is low, and the ultimate stress is small, etc
When installing the resin tile, drilling is an extremely important operation link. If the drilling cannot be carried out well, it is likely to cause the resin tile to crack. At the same time, we need to pay attention to that we can't step on the resin tile. If we have to step on it, we should pay attention to the position of the purlin, especially when the purlin spacing is large and in winter Reduce the pressure of resin tile to a large extent to avoid unnecessary accidents.
To sum up, we must be careful in choosing resin tile manufacturers, not to choose because of the low price, and pay attention to the installation problems, otherwise it is easy to cause the loss of their own interests. Be careful!
For the price of synthetic resin tile, please consult: 18180971732 manufacturers wholesale ASA resin tile, new rural villa roof tile, Sichuan anticorrosive tile, photo Daquan, Chengdu resin small green tile, Sichuan straw tile, PVC plastic tile, flexible facing brick, orange pole outer wall