Romenhas amberjet 1200na
Industrial strong acid cation exchange resin
Amberjet 1200na is a homogeneous, high quality, strong acid cation exchange resin. Application: softening and deionization. The particle uniformity of the designed AMBERJET 1200Na can be applied to industrial equipment. When it is used in hydrogen ion type, it can be used in mixed bed system with amberjet 4200cl. AMBERJET 1200Na can directly replace the traditional gel type cation exchange resin, and replace the resin in the new bucket slot and the equipment bucket tank.
Romenhas amberjet 1200na features
Resin matrix structure
Styrene / DIVINYLBENZENE copolymers
Functional group
-SO3-
Physical form
Insoluble, amber particles
Ionic form at the time of shipment
Sodium ion type
Total switching capacity
≥ 2.0 g equivalent / L (sodium type)
proportion
1.26 to 1.30 (sodium type)
Humidity ratio
43 to 47% (sodium type)
Packing density
850g / L (sodium type)
Particle size
Uniformity coefficient
< 1.2
Average particle diameter
650 (50um)
Fine particle content
<0.300mm: 0.1%max
Coarse particle content
>0.850mm: 10%max
Maximum reversible expansion rate
When the sodium type is converted to hydrogen type: 10%
Recommended operating conditions
Minimum bed depth
800mm
Water withdrawal velocity
5-50M/H
Technical parameters of regeneration
Maximum linear flow rate of mining water
60 m / h
Regenerating agent
sodium chloride
hydrochloric acid
sulphuric acid
Dose (g / L)
50-240
40-150
40-200
Concentration (%)
Ten
4-10
1-8
Flow rate (BV / HR)
2-8
2-5
2-20
Minimum contact time
20 minutes
Slow wash water volume
2BV, regeneration flow rate
Quick wash volume
1 - 3bv, according to the flow rate of water
*1BV (bed volume) = 1m3 solution per 1m3 of resin
performance
Working exchange capacity and ion leakage will vary according to several references, such as raw water quality, temperature and regeneration dose. Please refer to the engineering data QH series mixed bed operation conditions for relevant calculation data.
Hydraulic characteristics
Figure 1 shows the bed expansion characteristics of amberjet 1200na as a function of backwash flow and water temperature. Figure 2 shows the pressure drop characteristics of amberjet 1200na as a function of produced water flow and water temperature. The data of pressure drop is valid only when the resin bed has been stratified and clean water is taken as the first water recovery cycle.
Scope of use
Amberjet 1200na is suitable for industrial use. For other uses such as medicine, food processing and drinking water, please contact with Xi'an binrun environmental protection Co., Ltd. for suggestions on the type selection and operation conditions of ion exchange resin.