IOTA CORPORATION LTD.
Super Hydrophobic Nano Ceramic Coating IOTA ST6
Product description:
This product can be cured at room temperature and has long-lasting stain resistance. The hardness can reach 5H after complete curing. It also has excellent water-repellent effect and smooth feel.
Performance and indicators:
|
|
|
Indicator |
|
|
1 |
Appearance |
colorless transparent liquid |
|
|
2 |
Solids |
50% |
alcohol soluble |
|
3 |
Coating thickness (wet film) |
10-100 microns |
|
|
4 |
Coating thickness (dry film) |
1-50 microns |
|
|
5 |
Hardness (pencil hardness) |
5H |
GB/T 6739-1996 |
|
6 |
Adhesion Level |
0 级 |
GB/T 9286-1998 |
|
7 |
Color (after curing) |
transparent coating |
Pigments and fillers can be added |
|
8 |
Natural hardening time: |
30 minutes for surface drying, 3 days for deep curing |
|
|
9 |
Heat curing conditions |
|
|
|
10 |
Shelf life (months) |
6 months |
|
Feature:
1. Environmentally friendly products that do not pollute the environment.
2. Excellent performance, smooth and delicate feel.
3. Cures at room temperature and is easy to use.
4. This product has excellent hydrophobic properties (hydrophobic angle >100°) and water-repellent properties.
5. Excellent weather resistance and high temperature resistance (500℃).
Instructions:
1. Polish the substrate and remove grease. Clean up
2. Spray (brush, wipe) nano resin (can add pigments and fillers) on the surface of the device;
3. Curing at room temperature.
Precautions:
1. Dry film thickness is less than 10 microns, and the coating performance is optimal
2. When diluting the paint, solvents such as ethanol and esters can be used. If there is poor leveling, an appropriate amount of leveling agent can be added to adjust it.
