IOTA CORPORATION LTD.
Silicones contain only carbon, hydrogen, oxygen and silicon, so they decompose to produce water, carbon dioxide and silicon dioxide during combustion. Silica produced in the combustion process of si......
2021-08-20Organosilicon auxiliaries used as interlinking agent for waterborne coatings Waterborne coatings, especially single-component waterborne polyurethanes, are generally not as good as crosslinked two-co......
2021-08-19Silicone additive used as adhesion promoter Silane adhesion promoters have been widely used in glass, ceramic, zinc, iron and some plastic substrate solvent-based coatings system. Its working prin......
2021-08-19Silicone additive used as pigment filler dispersant In order to disperse the pigments uniformly and prevent settling, dispersant is indispensable. In terms of structure, the dispersant contains pigme......
2021-08-19Silicone auxiliaries - pollution resistant auxiliaries Organosilicon auxiliaries used as dirt resistant auxiliaries In some special fields (such as 3C) application of coating systems, usually have s......
2021-08-19Used as an organic silicon additive for coating resin modification Organic silicon material usually has some special properties, such as surface smooth, wear resistance, weather resistance, low tempe......
2021-08-19For systems requiring wear resistance, in addition to improving the cross-linking density from the perspective of resin, adding additives is also a common means, using silicone additives is a common m......
2021-08-18Because the surface tension of water in the water system is too large, it is difficult to fast wetting the substrate (especially the substrate with low surface tension), so in the water-based coat......
2021-08-18Antifoaming agents used in coatings usually require a lower surface tension than the application system and are incompatible with the application system. Because of its low polarity structure, s......
2021-08-18The structure of leveling agents for coatings generally consists of a chain segment compatible with the system and a chain segment incompatible with the system and with a surface tension lower than th......
2021-08-18The additives used in the coating are mostly surfactants, by reducing the surface tension of the gas-liquid, liquid-solid or gas-solid interface, to achieve leveling, defoaming, dispersion and impro......
2021-08-18Choose the principle of antifoaming agent type depends on the composition of lube oil and oil use, use of additives in lubricating oil for surface active agent, a surfactant can and several kinds of......
2021-08-17Non-silicone polymers Can be used in acidic oils such as steam turbine oils and hydraulic oils where silicone polymers lose their defoaming properties after prolonged use. The most commonly used non......
2021-08-17In the process of industrial production, many harmful foam will be produced, and anti-foam agent needs to be added. There are many kinds of anti-foaming agent, organosiloxane, polyether, silicon and......
2021-08-17Oil foaming can be divided into two aspects, one is surface foaming, usually can be controlled with anti-foaming agent; The other is the foam inside the oil, the internal foam is not easy to improve b......
2021-08-17
