Hydroxyl silicone oil

Features
This product is a hydroxy-terminated dimethyl siloxane, which is an oil-like colorless or light yellow liquid. It is synthesized by scientific methods. 

The structural formula is as follows:

HO-Si (CH3) 2 O [Si (CH3) 2 O] n Si(CH3)2-OH

Colorless transparent liquid with excellent electrical insulating properties and resistance to high temperature, high flash point, low freezing point, long-term used -50 o C ~ +250 o C conditions, low the viscosity-temperature coefficient, high compression ratio, low surface tension, hydrophobic moisture resistance, chemical inertness, physiologically inertness.Chemical name is a, w- dihydroxy polydimethylsiloxane, it name 107 silicone rubber when the viscosity is above 2500mPa.S. In addition to the general performance of methyl silicone oil, it also has reactive hydroxyl groups, it can be made available some new material or crosslinked into elastomers (or membrane) .

Specifications:

Appearance : colorless transparent liquid.
Hydroxyl content (%): 0.5 - 3 (related to the viscosity).

Viscosity (25oC, mpa.s): 25~100000 (can be customized according to user requirements ).

Application:

Depending on the hydroxyl content and viscosity, respectively for different industries .

The medium-high viscosity of the product can be used as a paper –based of anti- adhesive agent, the cured film has excellent anti-sticking effect, such as the label backing paper , asphalt wrapping, sealing tape base paper, decor paper end paper processing.
Alter dimethyl silicone oil, and easy to emulsify .

Dosage:

Usually with the curing agent to achieve the crosslinking, it must be fixed by means of a coupling agent for the release paper, generally the curing agent is about 3 to 5% of gum base, the coupling agent is about 0.5 to 1 % of gum base.

In most cases the solvent was diluted with 10 times the first gum base, then add the coupling agent and the curing agent after mixing uniformly coated on the substrate surface at room temperature or heat curing.  It need over 30 minutes at room temperature,  and 30 seconds for 120 ~ 150 o C. 

Note:

Hydroxy silicone oil can not be mixed with high temperature water vapor, acid/alkali substances, alkoxysilanes, otherwise there is a tendency curing and viscosity changes.

Packaging and Storage:

According to the non –toxic and non-dangerous goods storage and transportation;
The product should be stored in airtight plastic bucket clean not in contact with acid, alkali substances;

Stored at room temperature and ventilated shade.