IOTA CORPORATION LTD.
The most common modified and unmodified inorganic rheology modifiers include attapulgite clay, bentonite, organoclay, and treated and untreated synthetic silica. Most inorganic thickeners and rheology......
2020-02-18If the viscosity of a substance can be maintained at different shear rates, we call it showing ideal viscosity or "Newtonian viscosity". Newtonian fluids generally only occur in low molecular weight......
2020-02-18The rheological agent is a key component of paint and ink coatings. It can control the precise characteristics and characteristics of fluid products. Without these media, it will “flow and flow” lik......
2020-02-18Due to the positive charge of cationic acrylate and its water-based property, it is more extensive and more environmentally friendly in coating industry applications. At present, the composition and p......
2020-02-17Compared with the anionic acrylate emulsion, the raw materials of the cationic acrylate emulsion include fewer types of cationic emulsifiers, cationic monomers, and cationic initiators, resulting in l......
2020-02-17The metal surface has a negative charge to interact with cations, which increases adhesion and can also passivate the metal surface. In addition, there is a good binding force between the cationic pri......
2020-02-17Cationic acrylate emulsions are often used in interior wall renovation applications abroad. Old interior wall coatings generally have problems such as mottled and smoke stains. Cationic acrylate emuls......
2020-02-17Acrylate emulsion has the advantages of strong adhesion, simple production process, and low cost. It is the most common type of coating raw materials. It is generally an anionic e......
2020-02-17(11) Creeping: The phenomenon that the wet paint film spreads naturally beyond the original paint area. (12) Missing application area; Missing application point (Miss; holidays): A pathological sta......
2020-02-14(1) Pin-holes: A condition in which a towel has a pore similar to a puncture formed with a needle in the coating film. It is caused by air bubbles mixed in the wet film and other air bubbles generat......
2020-02-14(1) Clouding: Varnishes, oils or thinners appear cloudy and opaque due to precipitation of insolubles. (2) Discoloration of varnish or paint: During storage, coatings deviate from their original co......
2020-02-14There is no difference between using oil-based paint and only the variety of paint. The process is divided into the following aspects: substrate surface treatment (referred to as pretreatment), includ......
2020-02-14According to foreign media reports, researchers at the Institute of Engineering of the Federal Institute of Technology (EPFL) in Lausanne, Switzerland have developed a breakthrough 3D printing method ......
2020-02-14Reporter learned from the Huludao City Propaganda Department that at around 19:50 on February 11, an explosion accident occurred in the dimethozone workshop of Liaoning Xianda Agricultural Science Co.......
2020-02-12After a continuous decline, the domestic silicone market bottomed out in December and the atmosphere picked up, and the silicone DMC market began to pick up. As of last weekend, the average price of t......
2020-02-12
